How do I place on or change the electrodes on the flex clip?Updated 8 months ago

5 Steps to attach gel electrodes to the flex clip:

1. With the electrode package sleeve in one hand, take your flex clip and align the metal hole with the metal knob on the back of an electrode. 

2. Gently push the flex clip onto the metal knob until you feel and hear it "snap" into place. If the flex clip doesn’t slide off the electrode, you’ve successfully attached the electrode.

3. Once attached, use your thumb to lift the edge of the electrode and peel it off the plastic film in the sleeve. 

4. Repeat steps 1-4 for the other side. 

5. Once attached, rotate the electrodes by the edge so they align with the flex clip. 

*Avoid touching the gel side of the electrodes to preserve their effectiveness.

Electrodes last for 3 days, regardless of whether you use them for sessions or not. So make sure to snap in a new set of electrodes every 4th day.

When not in use, place the flex clip with electrodes face-down on the mound of the charger base. Gently press the electrodes onto the mound of the charging base to ensure full contact and protect them from dust, other particles, and drying out.

Click here to watch a short video on how to attach new electrodes to the flex clip: